轮胎放气怎么放

轮胎放气的详细步骤如下:

1.  park the car on a level surface and turn off the engine.泊车在平坦地面,关闭发动机。

2.  Locate the valve stem on your tire.轮胎的气门位于轮胎侧壁,通常靠近轮辋。

3.  Grab the tire pressure gauge and firmly press it onto the valve stem to get a reading.拿出轮胎压力表,牢固地按在气门上测量当前气压。

4.  Compare the reading to the recommended PSI listed in your owner's manual or on the placard located in the driver's side doorjamb or fuel door.与车主手册或驾驶员侧车门轴或加油门上的铭牌上推荐的PSI比较读数。

5.  If the reading is too high, press down on the metal stem in the center of the valve to release air.如果读数太高,按下气门中心的金属阀杆释放气体。

6.  Check the pressure frequently as the air releases to avoid over deflating the tire.空气释放时,要频繁检查压力,避免轮胎漏气过度。

7.  Once the proper PSI has been reached, replace the valve cap.达到适当的PSI后,放回气门帽。

8.  Repeat the same steps for other tires if needed.如有需要,重复相同步骤给其他轮胎放气。

9.  Drive the vehicle around slowly to allow the tires to adjust and recheck pressures to ensure evenness.缓慢驾驶车辆,让轮胎调整,然后再检查压力,确保轮胎压力平均。  

放气时要注意轮胎压力表准确度, control 速度和手法,防止放气过度。轮胎气压减少会影响车辆操控性和舒适度。所以放气后要尽快达到推荐的正常气压。